Brand | 親和産業 |
---|---|
メーカー | 親和産業 |
製品サイズ | 24.99 x 19.99 x 15.01 cm; 1 g |
商品モデル番号 | TG-K-001-RS |
Is Discontinued By Manufacturer | いいえ |
商品の寸法 幅 × 高さ | 25 x 20 x 15 cm |
同梱バッテリー | いいえ |
商品の重量 | 1 g |
【正規品 親和産業】 ドイツ Thermal Grizzly オーバークロック用特別設計高性能熱伝導グリス Kryonaut 1g
- モデル番号を入力してください これが適合するか確認:
- 熱伝導率:12.5W/m・k 粘度:120~170pas 耐熱温度:-250℃~350℃ 色:ライトグレー
- 容量:1g 付属品:メーカーロゴ入り特製へら x 1 RoHS指令:準拠
- 非導電性のため、ショートの心配がありません。
- 80℃の高温においても乾燥が進まない特別な配合を行っています。
- 長期間硬化せず安定した特性を維持します。
- グリスを塗布するのに便利な、Thermal Grizzly社ロゴ入り特製へらが付属しています。
- 包装袋は再封可能なジッパー付を採用しております。
- 余ったグリスを乾燥から守り、劣化を抑え長期間保管することができます。
- 高性能な冷却システムの能力を十分に引き出すことができます。
- ハイエンドグリスをリーズナブルに試してみたいユーザーにおすすめな、小容量お試しモデル
この商品はあわせ買いプログラムの対象です。
よく一緒に購入されている商品
こちらもおすすめ
- ASUS INTEL Z490 搭載 LGA1200 対応 ROG STRIX Z490-F GAMING 【 ATX 】
- NZXT H510 Elite White & Black ミドルタワーPCケース 強化ガラスモデル CA-H510E-W1 CS7941
- Seagate FireCuda 520 M.2 【データ復旧3年付】 1TB PCIe Gen4x4 内蔵SSD M.2 2280 3D TLC 正規代理店品 5年保証 ZP1000GM3A002
- NZXT KRAKEN X63 簡易水冷CPUクーラー RGB対応 280mm RL-KRX63-01 FN1443
- AMD Ryzen 7 3700X with Wraith Prism cooler 3.6GHz 8コア / 16スレッド 36MB 65W 100-100000071BOX 三年保証 [並行輸入品]
- AMD Ryzen 5 3600 with Wraith Stealth cooler 3.6GHz 6コア / 12スレッド 35MB 65W【国内正規代理店品】 100-100000031BOX
不明な点がある場合
商品情報、Q&A、レビューで回答を検索
あなたの質問は、この商品を購入した出品者、メーカー、購入者が回答する場合があります。
有効な質問が入力されていることを確認してください。質問は編集することができます。または、そのまま投稿してください。
質問を入力してください。
商品の情報
サイズ:1g | パターン:単品詳細情報
登録情報
ASIN | B011F7W3LU |
---|---|
おすすめ度 |
5つ星のうち4.5 |
Amazon 売れ筋ランキング |
- 163位パソコン・周辺機器 (の売れ筋ランキングを見るパソコン・周辺機器)
- 1位シリコングリス |
Amazon.co.jp での取り扱い開始日 | 2015/8/19 |
ご意見ご要望
この商品をチェックした人はこんな商品もチェックしています
商品の説明
オーバークロッキングコミュニティの非常に厳しい要求に応えるため、特別に開発されました。非常に優れた熱伝導性能を発揮し、高性能な冷却システムの能力を十分に引き出すことができます。ハイエンドグリスをリーズナブルに試してみたいユーザーにおすすめな、小容量お試しモデルです。グリスの容量を少なくし容器を簡易なものに置きかえることにより、気軽にご使用頂ける価格帯に設定しました。
メーカーより

オーバークロック用に特別設計
オーバークロッキングコミュニティの厳しい要求に応えるため、特別に開発。優れた熱伝導性能を発揮し、高性能な冷却システムの能力を十分に引き出すことができる。 ナノ微粒子構造で、ペーストに含まれる微粒子化されたアルミニウムと酸化亜鉛がCPUなどの熱媒体とヒートシンクのわずかな凸凹を補間し、優れた熱伝導率を実現。 80℃の高温においても乾燥が進まない特別な配合を行っており、長期間硬化せず安定した特性を維持する。また、非導電性のためショートの心配がない。

塗布用へら付属
グリスを塗布するのに使いやすい、Thermal Grizzly社ロゴ入り特製へらが付属。

再封可能な包装袋
包装袋は再封可能なジッパー付を採用。余ったグリスを乾燥から守ることができ、劣化を抑えながら長期間保管することができる。
特徴
|
|
|
---|---|---|
ナノ微粒子構造ペーストに含まれる微粒子化されたアルミニウムと酸化亜鉛がCPUなどの熱媒体とヒートシンクのわずかな凸凹を補間し、優れた熱伝導率を実現。 |
安定性80℃の高温においても乾燥が進まない特別な配合を行い、長期間硬化せず安定した特性を維持。 |
非導電性非導電性のため、ショートの心配がない。 |
この商品を買った人はこんな商品も買っています
- サイズ オリジナルCPUクーラー 虎徹 Mark II
- AMD Ryzen 5 3600 with Wraith Stealth cooler 3.6GHz 6コア / 12スレッド 35MB 65W【国内正規代理店品】 100-100000031BOX
- 玄人志向 STANDARDシリーズ 80 PLUS GOLD認証 750W フルプラグインATX電源 KRPW-GK750W/90+
- Corsair iCUE H150i RGB PRO XT 簡易水冷CPUクーラー 360mm CW-9060045-WW FN1380
- アイネックス グリス拭き取り用ウェットシート GS-CLN
- NZXT KRAKEN X63 簡易水冷CPUクーラー RGB対応 280mm RL-KRX63-01 FN1443
類似商品と比較する
![]()
この商品は
【正規品 親和産業】 ドイツ Thermal Grizzly オーバークロック用特別設計高性能熱伝導グリス Kryonaut 1g
|
![]()
アイネックス ナノダイヤモンドグリス JP-DX1
|
![]()
ARCTIC MX-4-4g cpu グリス;熱伝導グリス;熱伝導率:8.5W / m・k
|
![]()
【プロ推奨 高性能】シミオシ OC Master SMZ-01R (13.2W/m・K) 【親和産業 正規品】
|
![]()
アイネックス グリス拭き取り用ウェットシート GS-CLN
|
![]()
【正規品 親和産業】 ドイツ Thermal Grizzly オーバークロック用特別設計高性能熱伝導グリス Hydronaut 1g
|
|
---|---|---|---|---|---|---|
カスタマー評価 | 5つ星のうち4.5 (16945) | 5つ星のうち4.5 (552) | 5つ星のうち4.5 (361) | 5つ星のうち4.6 (178) | 5つ星のうち4.1 (55) | 5つ星のうち4.2 (897) |
価格 | ¥719 | ¥1,200 | ¥1,299 | ¥1,089 | ¥400 | ¥615 |
出荷 | 通常配送無料 詳細 | 通常配送無料 詳細 | 通常配送無料 詳細 | 通常配送無料 詳細 | 通常配送無料 詳細 | 通常配送無料 詳細 |
販売者 | Amazon.co.jp | Amazon.co.jp | AZWQE Japan | Amazon.co.jp | Amazon.co.jp | Amazon.co.jp |
ブランド名 | 親和産業 | AINEX | n /a | 親和 | AINEX | 親和産業 |
商品の重量 | 1.00 グラム | 情報が提供されていません | 情報が提供されていません | 情報が提供されていません | 情報が提供されていません | 1.00 グラム |
カスタマーレビュー
上位レビュー、対象国: 日本
レビューのフィルタリング中に問題が発生しました。後でもう一度試してください。
自分の塗り方が悪いのか、常に50℃~60℃くらいまで上昇してしまいブーストも4GHz以下になってしまいました。
ナノダイヤに塗り直したところ、35℃まで下がり4.1GHzまでブーストが効くようになりました。自分の環境ではナノダイヤの方が向いているようです。
そのくらいの使用頻度ですので、劣化などを考えるとグラム単価は高くても1g単位で買えるのが助かります。
性能も期待通りで、こちらとサイズ社の虎徹を使い、i5-8400が高負荷環境が続いても温度の急激な上昇や、不安な温度になることはありません。
なお、他の方も書いてある通り高粘度です。
自分は体温くらいに暖めたあと、添付されたヘラは使わず指を使って表面の数字が見えなくなるくらいの薄さで塗布しました。
cpuクーラー側にもすごく薄く塗っています。
参考にしていただけると幸いです。
今までダイヤモンドグリスを使用していたので
アイドル時や低負担時の温度はそれほど差はありませんでしたが
高負担時に大きく差が出ました
室温26℃で高負担時76℃(ダイヤモンドグリス)、61度(Kryonaut )
OC用に偽りはないですね
ノートで3Dゲームや負担の掛かる作業をしている人におすすめです
容量1gですが、薄塗りならば8回分ぐらいは持つと思います
CoolerMaster MasterLiquid 240のユルイOCで使用。
アイドル時で室温+8℃、OCCTで5GHzを維持した過負荷時で65℃前後と
結構冷えている方かと思います。
付属のヘラで薄く引き伸ばし易く、量的にも使い切りで丁度良かったです。
他の商品と比べ、量に対して価格が高いかもしれないですが、量が多くても
何度も塗り直す機会が無い事と性能を考慮すれば、コスパは良いと思います。
室温は28℃程の環境で作業していたので特別温めていたわけではありませんが、以前からシルバーグリスしか使ってなかったので高粘度の物に慣れていた…というのはあるかもしれません。
熱伝導率としては残念ながら比較材料がないので(使用しているクーラーに付属されていたものの試す気力もないので…)詳しくはわかりませんが、この価格でこのカタログスペックのものが購入できるのであれば充分でしょう。
今回フルロード時に70℃オーバーで落ちるのでこちらに交換してみたところ温度が45℃まで下がりました。
ファンを6500rpmのものにしたりいろいろ試しましたがほぼ効果なし、これが一番効果ありました。
今まではシリコングリスの安いものを使用していました。塗り直し後でもうろ覚えですが50℃は確実に超えていたと思います。半年ほど過ぎたあたりから冷却が落ちてくるので定期的に塗りなおしていますが、これほどまで下がったことはありません。50℃だとしても今回は45℃になったので5℃以上低下するのはなかなかすごいです。
あとはこれがどれくらい持つかが見どころですね。シリコングリスのようにすぐに乾かなければいいんですが…
一応、今回計測時の室温は28℃です。冬の間はなんとか持っていたんですけどね。気温が上がるとかなりキツかったです。真夏でどうなるかが気になりますね。
でも、凄く塗りやすいです。かなり、薄く塗れます。私は、保存はヘラキャップを付けたまま、元々付いてたビニール袋に入れて保存しています。3mlあるので当分、使えそうです。
ドイツ Thermal Grizzly社製は、かなり有名ですから、安心して使えます。他社製も2つグリスを持っていますが、今では専らこればかり使っています。
ドイツ Thermal Grizzly社製1gも使ったのですが、こちらは、3mlと違て銀色の固形に近く硬くて一回で全部使い切りました。良く冷えたと感じました。ドイツ Thermal Grizzly社製は、外れが無いですね。
他の国からのトップレビュー


Ce ne sont PAS des résidus de pâte mais bel et bien une dégradation de la surface

2018年5月17日にフランスでレビュー済み
Ce ne sont PAS des résidus de pâte mais bel et bien une dégradation de la surface


First things thing, I’m rocking a Ryzen R7 2700X at 4.1GHz with a CPU VDD of 1.36v. For cooling, I’m using a Cooler Master MasterLiquid Lite 120, with a Corsair LLL120 fan. As I ran out of my usual Noctua NT-H1, I’ll be putting this Thermal Grizzly Kryonaut against Cooler Master’s MasterGel that I had laying around from the MasterLiquid Lite 120.
Screenshots from HWMonitor included.
I also have a Phanteks P350X case with 2x Corsair LL120 fans in the top, and 2x Corsair LL140 fans in the front.
Unless I did something wrong, which I doubt. It seems as if there’s not a huge difference between the MasterGel and the Kryonaut. Which is a little disappointing. Although I didn’t look at the temps, you’ll have to take my word for it, that the Noctua NT-H1 gave similar temps. Max temps were done with a few consecutive runs of Cinebench R20.
With all of this said and done, I’d honestly say just go for Noctua’s NT-H1. It costs around the same, and you get 3.5g instead of just 1g with this. Although, I will admit, that applying the Kryonaut with the spreader was hassle-free...although could be done something else that’s plastic and has a straight edge.
Sidenote: The CPU and copper plate of the AiO were cleaned with Arctic’s material remover and purifier.

2019年3月24日に英国でレビュー済み
First things thing, I’m rocking a Ryzen R7 2700X at 4.1GHz with a CPU VDD of 1.36v. For cooling, I’m using a Cooler Master MasterLiquid Lite 120, with a Corsair LLL120 fan. As I ran out of my usual Noctua NT-H1, I’ll be putting this Thermal Grizzly Kryonaut against Cooler Master’s MasterGel that I had laying around from the MasterLiquid Lite 120.
Screenshots from HWMonitor included.
I also have a Phanteks P350X case with 2x Corsair LL120 fans in the top, and 2x Corsair LL140 fans in the front.
Unless I did something wrong, which I doubt. It seems as if there’s not a huge difference between the MasterGel and the Kryonaut. Which is a little disappointing. Although I didn’t look at the temps, you’ll have to take my word for it, that the Noctua NT-H1 gave similar temps. Max temps were done with a few consecutive runs of Cinebench R20.
With all of this said and done, I’d honestly say just go for Noctua’s NT-H1. It costs around the same, and you get 3.5g instead of just 1g with this. Although, I will admit, that applying the Kryonaut with the spreader was hassle-free...although could be done something else that’s plastic and has a straight edge.
Sidenote: The CPU and copper plate of the AiO were cleaned with Arctic’s material remover and purifier.


As this was the first time taking my expensive laptop apart, I was naturally very tense, due to which mistakes were made as follows :
1. I applied too much paste on CPU. GPU was a bit more but OK.
2. Didn't pay close attention to the thermal pad replacement. (I thought if it works don't fix it)
3. Didn't do a good job in eyeballing the thermal pad contacts. (After final tightening some pads were not making contact with the chokes).
4. Didn't follow the number order when screwing the heat sink/fans back.
As can be seen for from the tests there is not a big drop in temps as "I was expecting". Unfortunately I did not take a pre application tests to compare, but from what I remember with the same tests conducted under similar conditions earlier, the CPU and GPU temps were in their mid to high 80s. So keeping that as a rough ref. 2 cores are giving 10 drop but 2 cores are almost the same (I learn this problem is specific to this laptop later), the GPU has a 10-15 deg drop which is really great. So did the paste work? yes it did but I was expecting the CPU temps especially to stay below 80 DEG mark 🤷.
With the 30% left over paste I decided to give another try with my wife's Acer Aspire 13" R3 laptop (used only 10% of the 30% paste this time). This laptop does not have any fan or vents, there is just a metal plate or heat spreader that dissapates the heat to the chassie. My wife used to complain that the laptop underside gets very hot after an hour of use. The temps used to hover 60-70 deg.
This time I guess I did it right, applied the correct amount of paste, placed ADWITs thermal pads where necessary, checked that all was good before the final placement. The results are great here, as can be seen the temps are almost the same in both tests, but if u see closely before Grizzly after 30 mins of test due to the excess heat generation the laptop is limiting the cpu freq to 880 mhz and average multiplier for 30 mins is *11. After Grizzly results show after 45 mins of test the average multiplier is *22 at the same temps, clearly indicating good heat dissapation. Moreover now thar laptop does not heat up at all on the lap. After 2 hrs the temps hover high 40s to low 50s, and most importantly wife is happy.... hehe
So the paste is Great, BUT does only 40% of the job, rest 60% depends on the applicator's competency 😎.
All the best guys and hope this helped....

2020年9月15日にインドでレビュー済み
As this was the first time taking my expensive laptop apart, I was naturally very tense, due to which mistakes were made as follows :
1. I applied too much paste on CPU. GPU was a bit more but OK.
2. Didn't pay close attention to the thermal pad replacement. (I thought if it works don't fix it)
3. Didn't do a good job in eyeballing the thermal pad contacts. (After final tightening some pads were not making contact with the chokes).
4. Didn't follow the number order when screwing the heat sink/fans back.
As can be seen for from the tests there is not a big drop in temps as "I was expecting". Unfortunately I did not take a pre application tests to compare, but from what I remember with the same tests conducted under similar conditions earlier, the CPU and GPU temps were in their mid to high 80s. So keeping that as a rough ref. 2 cores are giving 10 drop but 2 cores are almost the same (I learn this problem is specific to this laptop later), the GPU has a 10-15 deg drop which is really great. So did the paste work? yes it did but I was expecting the CPU temps especially to stay below 80 DEG mark 🤷.
With the 30% left over paste I decided to give another try with my wife's Acer Aspire 13" R3 laptop (used only 10% of the 30% paste this time). This laptop does not have any fan or vents, there is just a metal plate or heat spreader that dissapates the heat to the chassie. My wife used to complain that the laptop underside gets very hot after an hour of use. The temps used to hover 60-70 deg.
This time I guess I did it right, applied the correct amount of paste, placed ADWITs thermal pads where necessary, checked that all was good before the final placement. The results are great here, as can be seen the temps are almost the same in both tests, but if u see closely before Grizzly after 30 mins of test due to the excess heat generation the laptop is limiting the cpu freq to 880 mhz and average multiplier for 30 mins is *11. After Grizzly results show after 45 mins of test the average multiplier is *22 at the same temps, clearly indicating good heat dissapation. Moreover now thar laptop does not heat up at all on the lap. After 2 hrs the temps hover high 40s to low 50s, and most importantly wife is happy.... hehe
So the paste is Great, BUT does only 40% of the job, rest 60% depends on the applicator's competency 😎.
All the best guys and hope this helped....







If it wasn't for such good results I would have certainly dropped at least 2 stars, it really was that bad.
Anyway onto the positive. I had the chance to test this against arctic mx4 and arctic silver 5 thermal pastes on the same system which consists of:
Intel 7800x with a coolermaster master liquid pro 120, gtx 1080ti and 16gb 3200 ddr4 memory. The motherboard is the asus strix x299.
For simplicity I used the furmark preset 4K test, everything was running at the normal clock speeds.
The resulting highest CPU temperatures were:
Arctic silver 5: 55 degrees.
Arctic mx4: 52 degrees.
Thermal Grizzly: 45 degrees.
As you can see from the results the highest recorded temps showed best results from thermal grizzly. Something I also noticed about thermal grizzly was the range of temperatures per core were within 1 - 2 degrees of each other while the other two varied much wider (around 6 degrees in some cases).
I don't think you will be disappointed with your results if you buy this thermal paste. I just hope removal isn't as bad as application!
現時点ではこのメニューの読み込みに問題があります。